Clamping Force

As we know clamping unit purpose is to keep mold closed against force when part injected with plastic material, because of that clamping force at least more than injection force, we can applied this clamp pressure both in injection machine with hydraulic or with mechanical toggle.

Injection molding machines are usually characterized by the tonnage of the clamping force that they provide. The clamping force, indicates the amount of force that the clamping unit can apply to the mold to keep it securely closed during the injection of the molten plastic, picture below shown injection machine from Nissei with type NEX80 (80 ton)




formula
the clamping force is proportional to the projected area of the moulding and runner, and must be opposed by the clamping force. although a proportion of the pressure produced by the injection cylinder is transmitted to the cavity, various losses occurring in the heating cylinder, nozzle and gate we can consider that force acts on the mold to make it open can be calculated from the following formula:

Force (lb.) = Pressure (lb/in2) x Projected Area (in2)

what is projected area ? projected area is area that one line with mold base parting line, for complete calculation, calculate the runner projected area and part projected area is more precision. see picture below to get the imagine og projected area



Clamping force calculator
below are clamping force calculator using java script, the script i get from http://www.custompartnet.com